MORTARS FOR INSULATION SYSTEMS TRADITERM® PROYECTABLE GP W2 Single-component white mortar with extraordinary adhesion to polystyrene and very low capillary absorption of water. Designed for application as an adhesive for TRADITERM PANEL EPS panels, TRADITERM PANEL EPS-G and mineral wool and as a reinforced coating of the same. Characteristics: Multi-purpose: adhesive mortar for insulation boards and also as a reinforced protecting render. Optimal adherence and excellent cohesion. Excellent workability. Vey low water permeability and optimal permeability to water vapour. Excellent resistance to aging even if subjected to hygrothermic cycles as a finishing coat for an ETIC system. 25 kg bag White • Theoretical performance (coating) Approx. 1,6 kg/m2 for mm thickness • Theoretical performance (adhesive) approx. 5-10 kg/m2 TRADITERM ® SYSTEM (ETICS) TRADITERM® GP W2 Hydraulic mortar used as an adhesive and covering on expanded polystyrene boards (TRADITERM PANEL EPS), expanded polystyrene graphite (TRADITERM PANEL EPS-G), mineral wool (TRADITERM PANEL MW) and natural cork (TRADITERM PANEL CORCHO), in the external heat insulation system Traditerm (SATE/ETICS). Characteristics: Multi-purpose: adhesive mortar for insulation boards and also as a reinforced protecting render. Optimal adherence and excellent cohesion. Excellent workability. Vey low water permeability and optimal permeability to water vapour. Excellent resistance to aging even if subjected to hygrothermic cycles as a finishing coat for an ETIC system. 25 kg bag Grey • Theoretical performance (coating) Approx. 1.5 kg/m2 for mm thickness • Theoretical performance (adhesive) approx. 5 to 10kg/m2 34 MORTARS FOR INSULATION SYSTEMS
RkJQdWJsaXNoZXIy Mjk3OTE=