Traditerm® Malla de Refuerzo
Fiberglass mesh with anti-alkali treatment and double twist threads, which combined with TRADITERM® Mesh, is used as a reinforcement to increase the impact resistance of those areas of the TRADITERM® System exposed to direct knocks. Ideal for reinforcing skirting boards (baseboards). It is fire resistant. TRADITERM® MALLA DE REFUERZO is resistant to cracking. Excellent tensile strenght and great flexiblity. In addition, it has a high resistance to shock.
Additional information
Composition
Fiberglass threads with anti-alkaline treatment.
Features and applications
- Easy to apply.
- Fire resistant.
- Resistant to cracking.
- Excellent tensile strength.
- Good flexibility.
- High resistance to shock.
- Reinforcement of skirting boards (baseboards) and those areas of the TRADITERM® external thermal insulation system exposed to direct impact.
Instructions for use
TRADITERM® Reinforcing Mesh, has to be combined with TRADITERM® Mesh.
- In the area to be reinforced, apply a coat of TRADITERM® mortar to the insulation panel and then comb with a notched trowel.
- Spread out the TRADITERM® Reinforcing Mesh, unrolling the roll horizontally onto the combed surface and crush the grooves by pressing with a trowel. Cover the mesh with the TRADITERM® mortar which protrudes. Although the mesh is covered, its grids should still be visible. This coat should have a thickness of 1.5 – 2 mm.
- TRADITERM® Reinforcing Mesh is not overlapped at joins between meshes.
- Once the surface obtained is dry, apply a new coat of TRADITERM® mortar to it and then comb with a notched trowel.
- Unroll the TRADITERM® Mesh onto the combed surface from top to bottom and crush the grooves by pressing with a trowel. Cover the mesh with the TRADITERM® mortar which protrudes. Although the mesh is covered, its grids should still be visible. This coat should have a thickness of 1.5 – 2 mm.
- Joins between meshes should be overlapped by a minimum of 10 cm.
- Once this reinforced coat has obtained some resistance, a new 1.5 – 2 mm coat of TRADITERM® mortar is applied to hide the grids of the mesh and finish the coated surface.
Cautions and recommendations
- Control the minimum thicknesses of TRADITERM® mortar required to apply the mesh.
- Handling this product does not require special care, although it may cause some irritation to more sensitive skin. If this happens, wash with plenty of cold water and soap.
Packaging
Rolls of 1 m x 25 mStore upright in a dry place protected from exposure to sunlight.
Technical data
(Statistical data obtained under standard conditions)
| Mesh size | 6x6 mm (±5%) |
| Mesh weigh | 330 g/m² (±5%) |
| Tensile strength | 61.3 N/mm (±3.2%) |
| Elongation to breakpoint | 3.2% (±0.1) |
| Mesh thickness | 0.9 mm |
| Format | Rolls of 1 m x 25 m |
Note
The instructions for use are given according to our tests and knowledge and do not imply any commitment by GRUPO PUMA nor free the consumer from the examination and verification of the products for their correct use. Claims must be accompanied by the original packaging to allow a proper traceability.
GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
The values obtained by GRUPO PUMAS's products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.
GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
The values obtained by GRUPO PUMAS's products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.