Pumacril Revestimiento Silicona

Features and applications

• Waterproof and water-repellent.
• Permeable to water vapour, allowing the substrate to breathe.
• Extraordinary whiteness and opacity.
• Suitable for the vast majority of substrates.
• Ageing, open environments and UV rays resistant.
• Excellent adherence on traditional construction substrates.
• Washable.
• Good homogenisation of the product and easy to apply.

This product has a protection against fungus, mould and algae which provides a long-lasting preventive and retardant effect although not permanent. The duration of this affectation depends on the exposure to humidity and the concentration of spores in the area, which create especially favourable conditions for the growth of micro-organisms. Therefore, a periodic preventive maintenance treatment is recommended.

Instructions for use

• Shake until perfect homogenisation.
• Apply a first diluted layer between 10-15% as primer.
• Dilute the second layer up to 5-10% with water.

NEW CONSTRUCTIONS:

• Remove any possible dust, grease and any other contaminants.
• A FIJAMOR layer may be convenient diluted with 2-3 parts of water, to fix and equalise the absorption of the substrate
• Apply the paint according to the instructions given.

OLD CONSTRUCTIONS:

• Removes any mould contamination as well as any remaining paint or other construction materials.
• Level any irregularities with a suitable amount of paste. Let it dry and sand it.
• A FIJAMOR layer may be convenient diluted with 2-3 parts of water, to fix and equalise the absorption of the substrate.
• Apply the paint according to the instructions given.

APPLICATION TOOLS:

• It can be applied by brush, roll or pistole, shaking of the product of respective dilution.
• Tools must be cleaned with abundant water before the paint dries.

Cautions and recommendations

• Do not apply under 5ºC.
• Do not apply the product with relative humidity above the 85% nor on wet substrates.
• Storage: Up to two years in its original closed packaging. In fresh and dry places, away from open air and direct sun light. Avoid extreme weather conditions (not lower to 5ºC nor above 35ºC) 

Packaging

 15 litres packaging

Technical data