Morcemrest^® Anticarbonatación E

Features and applications

• Excellent covering power.
• Extraordinary resistance to ageing.
• Completely impervious to rain water.
• It lets air and water vapour go through.
• No yellowing index.
• Maximum cleanability. Self-cleaning by the simple action of rain.
• Good resistance to alkalinity of the substrate.
• Resistant to open sky and U.V. rays.
• Great flexibility against the contractions of the substrate.
• It reduces CO₂ diffusion.
• It protects concrete elements against carbonation acording to EN 1504-2:2004.
• Good homogenization of the product and easy application.
• CE Certificate
• Declaration of conformity available.

Substrates

NEW SURFACES:

• Wait until its hardening process is fully completed (minimum 3 days)
• Remove dust, grease, or any type of dirt.
• Clean the substrate of foreign products or remains of construction materials.
• Any possible efflorescence can be treated with ANTISALMOR
• Apply a layer of FIJAMOR diluted with 2-3 parts of water, to fix and equalize the absorption of the substrate,
• if necessary.
• Apply the paint according to the instructions given.

OLD SURFACES:

• On painted substrates, the solidity and anchorage of the paint should be checked and diagnosed, if possible, its nature in order to avoid possible incompatibilities.
• Treat mouldy substrates with bleach or other suitable disinfectant.
• Remove dust, dirt and poorly adhered paint residues.
• Level any irregularity with an adequate plaster. let it dry  and sand it down.
• Apply a layer of FIJAMOR diluted with 2-3 parts of water, to fix and equalize the absorption of the substrate,
• Apply the paint according to the instructions given.

Instructions for use

• Stir the product until getting a homogeneous mixture.
• Dilute the first layer between 5 - 10% of water.
• Apply a second layer without dilution.
• Clean any used tool with water before the paint dries.
• The application can be done by brush, roller, airless or airbrush gun, after stirring the
• product and the corresponding dilution.
• Equipment cleaning should be done with water, before the paint gets dried.

Cautions and recommendations

• Do not apply at temperatures below 5ºC or above 30ºC
• Do not apply it under relative humidities superior to 85% nor on top of wet substrates.
• Thickness of 250 wet microns are recommended.
• Storing: In its tightly closed original packaging, in reserved cool and dry places away from open sly or direct sun light  and preventing it from being exposed to temperatures below 5ºC or higher than 35ºC.
   

Packaging

20 Kg RAL 7032 containers, 15L containers for the rest of the colors
Storage for up to 2 years in its well-closed original container, in cool, dry places away from the elements or direct sunlight, and avoiding exposure to temperatures below 5ºC or above 35ºC.

Technical data

Note

The instructions for use are given according to our tests and knowledge and do not imply any commitment by GRUPO PUMA nor free the consumer from the examination and verification of the products for their correct use. Claims must be accompanied by the original packaging to allow a proper traceability.

GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.

In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.

The values obtained by GRUPO PUMAS's products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.