Flooring

High performance self-leveling mortar, for the preparation of interior floors that once hardened is suitable to receive all types of flooring: ceramic, parquet, carpet, etc. Once hardened, it is suitable to receive all types of flooring: ceramic, parquet, carpet, etc. Pumpable. Thickness from 2 to 30 mm. Levelling mortar for irregular indoor floors. High mechanical excellent adhesion on cementitious and concrete mortars. This self-leveling mortar has very good workability and fast hardening.

Self-levelling mortar of normal setting for the preparation of interior floorings. Once hardened it must be covered with a discontinuous coating as parquet, carpet, ceramic floor tiles, vinyl flooring etc.

Self-leveling mortar of great fluidity, normal setting and that once hardened creates a screed of great flatness and mechanical resistance. Suitable for interior self-leveling screeds from 10 to 50 mm in adhered screeds and from 50 to 100 mm in floating screeds. Once hardened, it should be covered by discontinuous pavements (ceramic and others). This self-leveling mortar has great leveling capacity, even in large thicknesses. Suitable for interior floor screeds. Radiant heating floors.

Self-levelling Mortar of great fluency, fast dry and once  it gets hard, it create a slab of great flatness and mechanical resistance. Suitable for the accomplishment of self-levelling interiors from 10 to 50 mm in adhered screeds from 50 to 100 mm in floating screeds . Once hardened it must be covered by discontinuous pavements (ceramics, etc) or constant (paintings epoxy, etc). This self-levelling mortar has great levelling capacity, even in large thicknesses. Suitable for indoor floors. Radiant heating floors.

Self-levelling mortar fast and high performance, for indoor floors preparation. Once hardened, it is suitable for all kind of light floorings (tiles, parquet, fitted carpet, etc.). Mortar for levelling floors in interiors High mechanical resistance and good resistance to abrasion. This self-levelling mortar is fast hardening and suitable for radiant heating. It has a high self-levelling power. 

Self-levelling mortar for indoor floors preparation. Once hardened, it is suitable for all kind of light floorings (tiles, parquet, fitted carpet, etc.).

Self-levelling mortar for interior residential floors that once  harden accepts any kind of pavements: ceramic, parquet, etc. 2mm to 10 mm thickness. Mortar for levelling irregular pavements indoors. High mechanical resistance. Easy to lay and high self-levelling power.

Self-levelling covering, normal setting, which once hardened, creates a highly flat surface with high mechanical strength and excellent bonding performance to the substrate. Suitable for thicknesses from 5 to 15 mm.  This self-levelling coating boasts ease of laying and excellent adhesion to cementitious mortars and concrete. It has great levelling capacity as it is a levelling mortar for irregular floors indoors. Renovation of parking pavements.

Self-levelling coating, fast drying, which hardened once creates a coating of high flatness, high mechanical strength and excellent adhesion on the support application. Suitable for thicknesses between 5 and 15 mm. This self-levelling coating boasts ease of laying and excellent adhesion to cementitious mortars and concrete. It has great levelling capacity and is ideal for use in cold weather. Renovation of parking pavements.

Self-levelling, normal setting flooring mortar, pumpable, for levelling and smoothing interior industrial flooring. This product has high mechanical and substrate bonding strength once hardened. Thicknesses from 5 to 15 mm. For interiors: suitable as a finishing coat or base coat to be covered with fine coverings that provide the floor with greater chemical or physical protection, or for a more aesthetic finish. Self-levelling paving ideal for use in the cold season.

Self-levelling floor with normal setting, pumpable, for levelling and smoothing industrial floors. Product with great mechanical resistance and adherence to the substrate once hardened. Suitable for thicknesses from 5 to 25 mm. Indoor applications: suitable as a finishing coat or as a base to be covered with thin coatings that provide the pavement with greater chemical or physical protection or a more aesthetic finish. Outdoors: use only as base layer, never leave exposed (a coating is mandatory).

Mortar for bases creation with subsequent placement of other coatings such as parquet, carpet, ceramic, etc. Its fast drying feature allows the application of ceramics within 24 hours, as well as the execution of other types of work with notable time savings compared to other conventional mortars. Suitable for pedestrian traffic and underfloor heating, allowing different application thicknesses: between 20 and 40mm for bonded screed and between 40 and 80 mm for floating screed.

Adherence promoter, specially developed for the placement of resin pavements on non-porous and/or vitreous surfaces such as ceramics, stoneware, marble, stone, very low porosity concrete, polished cement, etc. Paviland Primer Ceramic makes a quick "wetting” easier on the above-mentioned surfaces, which results in the formation of substrate-polymer type bonds. In general terms, it favours the union between dry silica surfaces and polymerized liquid resin.

Bonding primer for Self-levelling Cement Systems by Grupo Puma, for interior and exterior use. Its high penetration performance on the substrate helps it to act as a substrate sealant and bonding primer.

Two-part epoxy resin-based product with very low viscosity, suitable for bonding fresh concrete or self-levelling mortars to hardened concrete, and hardened concrete to other materials. Its low viscosity makes it ideal for airless application. Very good penetration into the substrate. Suitable for interiors and exteriors.

Synthetic resin that is in use as promoter of adherence and primer fillers on supports of mineral, like cement or ceramic nature. Primer for PAVILAND ARQ systems and NIVELAND and PAVILAND levelling pastes. For indoor and outdoor application. Improves adhesion to the substrate, preventing the loss of water and the formation of bubbles.At the same time, it also improves the waterproofing and durability of the Paviland Arq systems.  Primer for covering pores on mineral supports and concrete surfaces. 

PAVILAND® ULTRA RÁPIDO is a dry compensated retraction concrete intended for fixing, supporting and repairing elements that may require high initial strengths and quick opening to transit. Its applications include the fixing of manhole frames, manholes, urban furniture, road repair, filling and anchoring of road signs, repair of industrial floors. It has a great adherence to concrete and quick opening to transit.

Dry-mix concrete.

Dry-mix concrete, intended for highly permeable flooring systems; constitutes an alternative to traditional flooring aesthetics. It reduces and/or prevents the surface flow of rain water or any other type of water by allowing permeation.It complies with Royal Decree 505/2007, of 20 April, which approved the basic conditions of accessibility and non-discrimination of people with disabilities for accessing and using developed public spaces and buildings.Paviland Drainage is free of resins so it does not emit volatile organic compounds that are harmful for the person applying the product and the environment.

Universal pigment dispersion free from  solvents base on additives related to pigments.

Powder product to be applied on fresh concrete, creating a monolithic surface layer with high abrasion resistance and a pleasant texture that can replace traditional pavements (paving stones, natural stone, slate, etc.). It can be used on streets, pavements, exterior areas, access to shopping centres, urban roads with pedestrian and vehicle traffic, accesses and surrounding areas of single-family homes, swimming pools, urbanizations, etc.

Powder product which is applied over fresh concrete to form an abrasion resistant monolithic coat, with short-term high mechanical strengths. The finishing, printing or texturing allows traditional flooring to be substituted (cobblestones, natural stone, slate, etc).

Mortar for high abrassion resistance stamped pavements in 5 to 20 mm thickness.
Fine texture and stamping. Suitable to replace ordinary pavements (slabs, bricks, stones, slate and any continuous flooring with industrial finish).
Can be used as a hydratation layer (fresh over fresh).

Product in powder form highly recommended to be used on stamped concrete. Avoids adhesion of moulds to concrete improving their release from the stamped concrete.

This product is a liquid demoulding agent for use on flooring and printed facings to avoid the concrete or mortar becoming stuck to the moulds.

PAVILAND ARQ BASE is a high quality polymeric mortar for preparing and smoothing surfaces before installing microcement decorative smooth finishes. The maximum thickness for application is 4mm. Base coat from the Paviland Arq Base systems from Grupo Puma.

PAVILAND ARQ FINISH is a coloured polymeric decorative finish for high quality interior and exterior applications with a maximum thickness of 1.5 mm. Finishing coat in the Paviland Arq systems.

Pigment for Paviland^® ARQ range.

Powder product which, when applied on fresh concrete, it makes a monolithic layer with great resistance to impact. Great resistance to abrasion. And easy to clean. Ideal for industrial building floors and hypermarkets subject to heavy traffic. Resistant to open air. Without dust formation on the surface.

Powder product, which, when applied on fresh concrete, it makes a monolithic coat with great resistance to abrasion. It has excellent mechanical strengths, and it is easy to clean. Suitable for industrial buildings floors subject to heavy traffic it is also suitable for logistic warehouse floors, shopping centre’s car parks,  or any other similar areas. Without dust formation on the surface.

Powder product, which, when applied on fresh concrete, it makes a monolithic layer with great resistance to abrasion. Suitable for industrial floors. Paviland Industrial has excellent mechanical strength and great resistance to abrasion. Available in a wide range of colours. Resistant to open air.

Liquid resin in a solvent medium, suitable for sealing and protecting flooring It is made from polymers based on methacrylate dissolved in aromatic solvents. It hardens through the evaporation of solvents and works by increasing the cohesion of the flooring, creating a decorative and highly resistant layer that enhances the properties of the flooring and increases its durability.

Product based on the dispersion of a pure acrylic methacrylate resin that is recommended as a finish on concrete and printed concrete floors, protecting them from external agents by sealing the pore. This product improves the features of printed concrete, providing it with a uniform and shiny finish. Due to its thin particle size, it has very good anchorage on the pavement and increases its cohesion. Thanks to the components involved in its formulation, it provides the substrate with a decorative and very resistant layer which accentuate the properties in the pavement and increases its durability.

Product based on the dispersal of styrene acrylic resin with low water absorption.  Is has good resistance to alkalis and yellowing, as well as great flexibility and durability in the exterior. Recommended as curing liquid with an aqueous base, best for printed paving.

Product based on the dispersal of pure acrylic resin, which can be used directly as a finishing film for concrete paving and printed concrete, protecting them from external agents by sealing the pore.
Applied on printed concrete, this product improves its finishing, giving a uniform and brilliant appearance.
Due to its small particle size, it has good anchorage to the paving and increases its cohesion.
Recommended as curing liquid with an aqueous base, best for printed paving.

Product based on the dispersal of pure acrylic resin, which can be used directly as a finishing film for concrete paving and printed concrete, protecting them from external agents by sealing the pore.
Applied on printed concrete, this product improves its finishing, giving a uniform and brilliant appearance.
Due to its small particle size, it has good anchorage to the paving and increases its cohesion.
Recommended as curing liquid with an aqueous base, best for printed paving.

Liquid product best for paving protection, composed of an acrylic copolymer dissolved in aromatic solvent.  Hardens through evaporation of solvents and acts by penetrating and compacting the particles, increasing paving cohesion both in interior and exterior applications.

Liquid product best for paving protection, formulated on the basis of acrylic resins with excellent hardness and ultraviolet ray resistance, dissolved in aromatic solvents.
Hardens through solvent evaporation and is especially advisable for concrete varnish, cut stone, etc, both in the interior and in the exterior, leaving a protective and decorative film with excellent properties.

Liquid product best for paving protection, composed of an acrylic copolymer dissolved in aromatic solvent.  Hardens through evaporation of solvents and acts by penetrating and compacting the particles, increasing paving cohesion both in interior and exterior applications.

Pure acrylic resin dispersion with low water absorption. Suitable for curing concrete on courts, industrial flooring, and continuous flooring in general. It controls water evaporation, regulating the drying time and contributing to a slow curing process which increases the final mechanical strength, achieving more durable surfaces and the maximum development of their hardness.

Liquid product best for the concrete curing process in order to promote its maximum performance. Controls hydration water evaporation regulating dry out time and favours slow curing to achieve an increase of final mechanical resistance, achieving more tenacious surfaces and the maximum development of its hardness.
Acts on the surface forming a plastic closing capable of eliminating systematically the formation of cracks and of controlling superficial retraction.

Acrylic priming monocomponent, based on resins in watery dispersion indicated for the preparation of the microcement surface before the application of the Paviland Arq Varnish. Fund of preparation of the completion varnish for the systems Paviland Arq.

Finishing treatment for resin, cement or microcement pavements, which provides a surface, with bacteriostatic efficiency, high impermeability, easy cleaning, high resistance to abrasion and scratching. It highlights and beautifies the pavement. It has good resistance to abrasion and to the marks caused by the pedestrian traffic. It forms, at the same time, an effective bacteriostatic film, which makes it especially recommended both in local and public places.

Paint based on acrylic resins in water, micronized fillers and pigments, of a single component, which acts as a decorative, finishing and sealing layer on cementitious and concrete substrates. Surface hardener for cementitious floors that seals and protects the treated surface. Garages, interior floors or exterior parking areas with very low traffic. It has a good resistance to ultraviolet rays, since it does not discolor.

Water-based epoxy resin coating, consisting of two components that harden through a chemical reaction and are tolerant to substrates containing some residual moisture. This flooring product exhibits extraordinary adhesion to the substrate, even on wet surfaces. It is also permeable to water vapour and various aggressive agents. Among its characteristics are easy application and being odourless, making it ideal for use in indoor, poorly ventilated garages.

Two-component epoxy resin-based coating that results in a coating with high mechanical and chemical resistance on concrete or mortar floors. This flooring product has exceptional adhesion to the substrate, high abrasion resistance, and very good chemical resistance to fuels, oils, greases, and acids.  Easy to mix and apply, its applications include industrial floors and warehouses, garages, or laboratories.

Two-component coating based on aliphatic polyurethanes, quick-drying with high chemical and abrasion resistance. Available in shine or matte finish. It has excellent adhesion to concrete, mortar, epoxy resins, and polyurethane resins. It also exhibits high abrasion resistance and very good chemical resistance.  This flooring product acts as a surface hardener for the substrate, providing good scratch resistance due to its toughness. Suitable for both interior and exterior floors.

Acrylic primer, in aqueous solution, for the preparation of concrete and asphalt foundations before the application of acrylic and epoxy-acrylic sports flooring systems. Fixes and seals the foundation, regularizing its absorption. Suitable indoors and outdoors.

Transparent epoxy resin of low viscosity, 100% solids, which mixed with arid from PAVILAND CUARZO or PAVILAND CUARZO COLOR range,  is used for the fulfilment of decorative pavements or industrial pavements

Coloured epoxy resin mixed with PAVILAND CUARZO 0,2 or PAVILAND CUARZO 0,3, it is used for the production of self-levelling pavements of low thickness (2 to 4 mm) and high resistance. This product for pavements is easy to apply and provides a very smooth and easy to clean finish. Waterproof in interior floors. Available in a wide range of colours. Among its different uses we can find the ones in food, chemical and pharmaceutical industry or even laboratories.

Two-component epoxy resin primer for application on low-porous concretes as well as a levelling coating for decorative and industrial floors.

A two-component primer based on very low-viscosity epoxy resins, for application on low-porous concrete. It adheres well to PAVILAND EP systems. It is very easy to apply. Among other applications, its use consolidates concrete or mortar floors.

Bi-component primer based on epoxy resins, of high viscosity, for application on very porous concrete. Paviland Primer EP HV is an adhesive flooring product for the PAVILAND EP systems. It also offers easy application. Among its functions is the consolidation of concrete or mortar floors.

Bi-component primer, formulated with epoxy resins in aqueous dispersion, for epoxy coatings. Acts as an adhesion layer for PAVILAND EPOXI-CEM. This product for flooring is adherent on damp supports and young concrete. It also boasts easy application. Among its functions is that of consolidating concrete or cementitious mortar floors.

Two-components primer based on epoxy resins, without solvents, of very low viscosity, suitable as  humid substrates primer and vapour barrier.
 

Coloured epoxy resin, for the preparation of multilayer pavements of 2 to 4 mm thicknesses, great adherence and mechanical and chemical resistance. These kind of pavement products are easy to apply and have a great anti-slippery system. Suitable as cladding and sealing layer. Waterproof in interior floors. Available in a wide range of colours. Among its different uses we can find the ones in food, chemical and pharmaceutical industry or even laboratories.

Acrylic resin base mortar for layers levelling of the surface in sports and pedestrian areas or in bicycle lanes.  This pavement product is very easy to apply and it’s suitable for the compensation of irregularities. It is a water base product suitable for indoor and outdoor floors.  Also suitable for car park areas with little traffic. Black colour.

Acrylic resin-based mortar for the application of adhesive layers and regularisation layers to sports and pedestrian surfaces or cycle lanes.

Finely granulated, coloured coating used as an intermediate layer for sport surfaces.

Paint based on acrylic resins in water, micronized fillers and pigments, of a single component, which acts as a decorative, finishing and sealing layer in sports flooring systems and cementitious, concrete and asphalt substrates. This flooring product has an aesthetic finish, easy application, and great durability. Good resistance to ultraviolet rays, as it does not discolor. Water-based product useful for indoor and outdoor areas.

Bi-component, epoxy resin-based primer in aqueous solution with mineral loads, for the preparation of concrete surfaces before the application of acrylic and epoxy-acrylic sports flooring systems. This flooring product has excellent adhesion to cementitious and concrete surfaces. It is easy to apply and can be used both indoors and outdoors. Preparation of concrete surfaces before application of the PAVILAND SPORT systems.

Thin-grained, coloured, two-component, acrylic-epoxy coating that acts as an intermediate coat in sports floors subjected to a significant degree of mechanical wear. This product for floors is very easy to apply and suitable for both interior and exterior areas. Suitable for sport areas floors subjected to intense use. Also suitable for highly durable bike lanes or outdoor car park areas with very low road traffic.

Two-part, epoxy resin-based primer in aqueous solution with mineral fillers, for the preparation of concrete bases before application of acrylic and epoxy-acrylic sports floors systems; for outdoor use.

High performance thixotropic mortar for the preparation of floors that, once hardened, creates a coating with high mechanical resistance, strong adherence to the base of application and high resistance to mechanical abrasion. Its consistency makes it suitable for application on sloping pavements. Suitable for thicknesses from 5 to 30 mm. It is used as leveling mortar for ramps and pavements with slopes in garages and industry.

Single-component cosmetic repair mortar for rendering and levelling concrete floors, which enhances the aesthetic appearance of the floors and its water resistance. 1 to 3 mm thickness. This product is suitable for floors. It has an excellent adhesion on concrete; it can also be used as levelling mortar for concrete floors and preparation of substrates for protective rendering. It is water and weather resistant.

Paviland AR Glass Fibre is a high-integrity, alkali-resistant chopped glass fibre designed for use in reinforcing concrete and mortars.

Paviland Fibra Macro CO-PO is a 54 cm long fibre, made of 100% virgin Copolymer-Polypropylene, specially designed for the structural reinforcement of concrete. Its structure made of twisted mono filament fibres, offers maximum durability without the risk of corrosion.

Specially formulated product to diminish the cracking tendency in mortars or concrete due to retraction.

Great stability glass fibre mesh for the reinforcement of cementitious mortars.  Suitable for Paviland Arq system. It provides the system with great resistance, stability and it avoids cracks that may appear due to movements in the substrate.

PAVILAND ASFALTO EN FRÍO has all the properties of a traditional warm agglomerate with the advantage of not requiring being heated.  There is no need of using all those tedious means required for hot-mix asphalt. Once it has been placed, it provides the very same properties as a traditional agglomerate of a tread layer:  It is durable, stable and flexible.

Dry siliceous aggregates of different granulometries for dusting or mixing in systems or products of the PAVILAND range. It is an aggregate of great hardness and stability. Useful for making anti-slip pavements. Dusting for primers and preparation of coatings and pavements in the PAVILAND EPOXI range.

Quartz aggregate of different colours for industrial decorative pavements:  anti- slipping and self-levelling multilayer systems.