Products that start with T

The Tejido Carbotec System is composed of a unidirectional carbon fiber fabric wrapped in a weft of glass thread covered with thermoplastic material that allows to maintain the position of the carbon fibres during its implementation. It is supplied in rolls of different widths and lengths.

TEXTUREFIX PLUS is a priming product for use in construction as a bonding coat between new and old mortar. It has a good penetration and cohesion capacity due to the size of the particles.It is also capable of improving adhesive conditions on vertical substrates as a prior step to applying facings. Recommended as a bonding agent for paintwork, especially on plaster facings, perlite and old substrates.It also acts as a primer for regulating the absorbency of substrates such as cellular concrete or silico-calcareous brick, suitably treating substrates with high humidity or irregular absorption levels in order to keep the plasterwork uniformly hydrated after plastering. 

TEXTUREFIX-120 is a water-based acrylic vinyl primer, to be used in construction as a bonding bridge between new and old mortars. It presents a good capacity of penetration and cohesion, due to its particle size and good residual tack. It is also able to improve the adhesion conditions of the substrate in vertical supports, as a step prior to the application of the coating. Especially recommended for use as a primer before applying our mortar printed MORCEM TEXTURE (vertical supports).

Specially formulated cementitious adhesive, non-sagging, for thick-bed installation in direct tiling on brick walls without the need for prior plastering and on floors with irregular substrates. Suitable for interior and exterior areas. Highly recommended for porcelain floors in new constructions. Suitable for all type of ceramic pieces, marble, and granite stone bonding.

Adhesive mortar for rendering and for fixing insulation materials (glass fibre or rock wool) to walls.
It is rainwater proof and permeable to water vapour, allowing the system to breath. Also a fire-proof system.

The Traditerm perfil arranque PVC cierre oculto forms, together with the different PVC starting profiles, the PVC base set for the level foundation of thermal insulation panels in the Traditerm / WalAce System (SATE/ETICS). It includes an invisible bellcast bead in PVC and a fibreglass mesh for a clean render finish and to guarantee vertical water drainage. 

Element for fixing light loads of up to 5 kg to the outdoor TRADITERM® thermal insulation system. Polyamide composite. Easy application. Does not generate thermal bridges.

Polyurethane foam tape with an adhesive acrylic impregnation on one side. Hermetic and watertight sealing of the external joints thanks to its dimensional tolerance on leveling.
 

TRADITERM® MALLA consists of double weave threads, essential for reinforcing the TRADITERM® panels. Recommended in the application of TRADITERM® exterior thermal insulation systems. Giving the system greater resistance and stability, and preventing the appearance of cracks caused by temperature differences or movement of the insulation panels. Excellent traction resistance and improves impact resistance.

Fiberglass mesh with anti-alkali treatment and double twist threads, which combined with TRADITERM® Mesh, is used as a reinforcement to increase the impact resistance of those areas of the TRADITERM® System exposed to direct knocks. Ideal for reinforcing skirting boards (baseboards). It is fire resistant. TRADITERM® MALLA DE REFUERZO is resistant to cracking. Excellent tensile strenght and great flexiblity. In addition, it has a high resistance to shock.

Natural expanded cork agglomerate used as thermal-acoustic insulation in the Traditerm Nature System (EWI/ETICS), suitable for both new buildings and restoration work. This product is suitable for the TRADITERM® exterior thermal insulation systems. It gives a 100% natural insulation and highly breathable. The range of thicknesses that provide different levels of insulation. Its a light and workable material, also easy to cut.  

Thermal insulation panel made of self-extinguishing expanded polystyrene, used in the TRADITERM® external thermal insulation system. The expanded polystyrene panel is used as insulation within the TRADITERM® System both in new and restoration work. Its a light and workable material, also easy to cut. The range of thicknesses provide different levels of thermal insulation. It has an excellent resistance to aging.

Improved thermal insulation panel made of self-extinguishing expanded polystyrene, used in the TRADITERM® external thermal insulation system. The expanded polystyrene panel is used as insulation within the TRADITERM® System both in new and restoration work. Its an excellent thermal insulator thanks to its very low conductivity. Its composition makes it a lightweight and workable material. Its range of thicknesses provide different levels of thermal insulation.

Aluminium perforated reinforcing corner profile, used with the TRADITERM® System. Its easy to apply and the incorporation of the mesh to the profile makes the corner much faster to use.

Used in the Traditerm System. Reinforcing profile for the formation and reinforcement of arcs and circular gaps. Its fast and easy to apply. The profile can be easily folded and adapted to the curvature of the edge that needs to be reinforced. The minimum curvature diameter is 1m.

PVC profile, designed for corner reinforcement in  external thermal insulation Traditerm Systems(SATE/ETICS). Its easy to apply and the incorporation of the mesh to the profile, makes the execution of the corner faster.

PVC profile, designed for corner reinforcement with an angle different to 90ºC in Aislamiento Térmico Exterior Traditerm Systems(SATE/ETICS). Used as corner reinforcement that doesn´t form straight angles. Its easy to apply and the incorporation of the mesh to the profile makes the execution of the corner faster.

Corner reinforcement profile in perforated PVC, used in the TRADITERM® System. This component of the system is easy to apply. The incorporation of the mesh into the profile, makes it quicker to do the corner and allowing an optimal functioning.

Starter and protection profile used in the TRADITERM® System. It protect and reinforce the base. Used as a guide for the aligning the insulation panels. It does not rust and its easy to apply. It has a range of thicknesses to choose depending on the thickness of the insulation panel used.

Protection and closing profile in External thermal insulation Traditerm Systems (SATE/ETICS). The TRADITERM® PERFIL CIERRE LATERAL protects and reinforces the side finishes of the Systems.TRADITERM® (thermal insulation), does not rust and is easy to install on site. It has a range of thicknesses to be chosen according to the thickness of the insulating panel used.

Protect and reinforce the superior closing profile in External thermal insulation Traditerm Systems (SATE/ETICS). Its easy to apply and does not rust. There is a range of thicknesses to choose depending on the thickness of the insulation panel used.

Profile for reinforcing and forming guttering in the TRADITERM® thermal insulation system. Its morphology allows a correct evacuation of rainwater on the facade preventing the deterioration of carpentry and the Thermal Insulation System itself from the outside (SATE) in these meetings.

PVC profile with anti-alkaline fibreglass mesh and flexible band for joint treatment. Designed as a solution for expansion and structural joints in the support where the TRADITERM® Exterior Thermal Insulation Systems (SATE/ETICS) is going to be installed.

Wall anchor plug for insulating panels attachment in the TRADITERM external thermal insulator system. High quality and safety plug.

Anchor used to fasten insulation panels in the TRADITERM® System. Traditerm® Anchor is made of polyethylene and consists of two elements differentiated (nail and sheath). It is a percussion anchorage plug, used to fix the panels insulation in the TRADITERM Exterior Thermal Insulation System. It is easy to apply. It ensures a perfect fixing of the plates to the support. Resistant to oxidation. Wide range of product sizes for correct adaptation to thermal insulation systems depending on the thickness of the plate. European approval according to ETA-16/0509.

Anchor suitable for wooden substrates with zinc screw. Easy and fast execution. It ensures a fixation
of high quality insulating panels on wooden supports. Possibility of hidden anchorage in the system. Fixing of insulating panels to the External Thermal Insulation System Traditerm®(SATE/ETICS). Permanent contact pressure. Range of sizes, depending on the thickness of the insulating panel to be used.

Anchor fixings with threaded screw, for fixing TRADITERM^® external insulation panels. High quality, secure anchor fixings. As it is a pre-assembled screw, it is easy and quick to install. It ensures a high quality fixing of the insulating panels to the support. With European Certification. Possibility of hidden anchorage in the system. Range of sizes, depending on the thickness of the panel. Use category according to ETA.

Expanded polystyrene cover to  fill in the gap lefts by the corona STR in the insulating panel when TRADITERM® TACO DE ANCLAJE STR U 2G is installed. Levelling of TRADITERM® PANEL EPS. Get the TRADITERM® TACO DE ANCLAJE STR U 2G hidden inside the insulation panel.

Screw for mechanically fastening TRADITERM® 300 Mounting. This steel screw ensures that the rigid polyurethane element is fixed at four points, by anchoring this piece to the support, provided that the latter has suitable resistance conditions on its surface for its correct anchorage.

White crushed marble is available in various grain sizes and is commonly used for manufacturing pebbles, prefabricated elements, decoration, gardening, etc.