Products that start with P

Geotextile not knitting, formed by cut fibers of Polypropylene of high tenacity 100 %, joined mechanically by a needled and thermo- fixed process, stabilized against UV rays.

Geotextile not knitting, formed by cut fibers of Polypropylene of high tenacity 100 %, joined mechanically by a needled and thermo- fixed process, stabilized against UV rays.

Coloured epoxy resin mixed with PAVILAND CUARZO 0,2 or PAVILAND CUARZO 0,3, it is used for the production of self-levelling pavements of low thickness (2 to 4 mm) and high resistance. This product for pavements is easy to apply and provides a very smooth and easy to clean finish. Waterproof in interior floors. Available in a wide range of colours. Among its different uses we can find the ones in food, chemical and pharmaceutical industry or even laboratories.

Paviland Fibra Macro CO-PO is a 54 cm long fibre, made of 100% virgin Copolymer-Polypropylene, specially designed for the structural reinforcement of concrete. Its structure made of twisted mono filament fibres, offers maximum durability without the risk of corrosion.

Acrylic primer, in aqueous solution, for the preparation of concrete and asphalt foundations before the application of acrylic and epoxy-acrylic sports flooring systems. Fixes and seals the foundation, regularizing its absorption. Suitable indoors and outdoors.

PAVILAND ARQ FINISH is a coloured polymeric decorative finish for high quality interior and exterior applications with a maximum thickness of 1.5 mm. Finishing coat in the Paviland Arq systems.

Finishing treatment for resin, cement or microcement pavements, which provides a surface, with bacteriostatic efficiency, high impermeability, easy cleaning, high resistance to abrasion and scratching. It highlights and beautifies the pavement. It has good resistance to abrasion and to the marks caused by the pedestrian traffic. It forms, at the same time, an effective bacteriostatic film, which makes it especially recommended both in local and public places.

PAVILAND ARQ BASE is a high quality polymeric mortar for preparing and smoothing surfaces before installing microcement decorative smooth finishes. The maximum thickness for application is 4mm. Base coat from the Paviland Arq Base systems from Grupo Puma.

Pigment for Paviland^® ARQ range.

Great stability glass fibre mesh for the reinforcement of cementitious mortars.  Suitable for Paviland Arq system. It provides the system with great resistance, stability and it avoids cracks that may appear due to movements in the substrate.

Synthetic resin that is in use as promoter of adherence and primer fillers on supports of mineral, like cement or ceramic nature. Primer for PAVILAND ARQ systems and NIVELAND and PAVILAND levelling pastes. For indoor and outdoor application. Improves adhesion to the substrate, preventing the loss of water and the formation of bubbles.At the same time, it also improves the waterproofing and durability of the Paviland Arq systems.  Primer for covering pores on mineral supports and concrete surfaces. 

Acrylic priming monocomponent, based on resins in watery dispersion indicated for the preparation of the microcement surface before the application of the Paviland Arq Varnish. Fund of preparation of the completion varnish for the systems Paviland Arq.

PAVILAND ASFALTO EN FRÍO has all the properties of a traditional warm agglomerate with the advantage of not requiring being heated.  There is no need of using all those tedious means required for hot-mix asphalt. Once it has been placed, it provides the very same properties as a traditional agglomerate of a tread layer:  It is durable, stable and flexible.

Crushed rubber from recycled tire, with different sizes and colors. Used for the implementation of continuous and flexible pavement manufactured in situ.

Single-component cosmetic repair mortar for rendering and levelling concrete floors, which enhances the aesthetic appearance of the floors and its water resistance. 1 to 3 mm thickness. This product is suitable for floors. It has an excellent adhesion on concrete; it can also be used as levelling mortar for concrete floors and preparation of substrates for protective rendering. It is water and weather resistant.

Dry siliceous aggregates of different granulometries for dusting or mixing in systems or products of the PAVILAND range. It is an aggregate of great hardness and stability. Useful for making anti-slip pavements. Dusting for primers and preparation of coatings and pavements in the PAVILAND EPOXI range.

Quartz aggregate of different colours for industrial decorative pavements:  anti- slipping and self-levelling multilayer systems.

Product in powder form highly recommended to be used on stamped concrete. Avoids adhesion of moulds to concrete improving their release from the stamped concrete.

This product is a liquid demoulding agent for use on flooring and printed facings to avoid the concrete or mortar becoming stuck to the moulds.

Dry-mix concrete, intended for highly permeable flooring systems; constitutes an alternative to traditional flooring aesthetics. It reduces and/or prevents the surface flow of rain water or any other type of water by allowing permeation.It complies with Royal Decree 505/2007, of 20 April, which approved the basic conditions of accessibility and non-discrimination of people with disabilities for accessing and using developed public spaces and buildings.Paviland Drainage is free of resins so it does not emit volatile organic compounds that are harmful for the person applying the product and the environment.

Two-component epoxy resin primer for application on low-porous concretes as well as a levelling coating for decorative and industrial floors.

Transparent epoxy resin of low viscosity, 100% solids, which mixed with arid from PAVILAND CUARZO or PAVILAND CUARZO COLOR range,  is used for the fulfilment of decorative pavements or industrial pavements

Coloured epoxy resin, for the preparation of multilayer pavements of 2 to 4 mm thicknesses, great adherence and mechanical and chemical resistance. These kind of pavement products are easy to apply and have a great anti-slippery system. Suitable as cladding and sealing layer. Waterproof in interior floors. Available in a wide range of colours. Among its different uses we can find the ones in food, chemical and pharmaceutical industry or even laboratories.

Specially formulated product to diminish the cracking tendency in mortars or concrete due to retraction.

Paviland AR Glass Fibre is a high-integrity, alkali-resistant chopped glass fibre designed for use in reinforcing concrete and mortars.

Two-part epoxy resin-based product with very low viscosity, suitable for bonding fresh concrete or self-levelling mortars to hardened concrete, and hardened concrete to other materials. Its low viscosity makes it ideal for airless application. Very good penetration into the substrate. Suitable for interiors and exteriors.

Dry-mix concrete.

Powder product to be applied on fresh concrete, creating a monolithic surface layer with high abrasion resistance and a pleasant texture that can replace traditional pavements (paving stones, natural stone, slate, etc.). It can be used on streets, pavements, exterior areas, access to shopping centres, urban roads with pedestrian and vehicle traffic, accesses and surrounding areas of single-family homes, swimming pools, urbanizations, etc.

Powder product which is applied over fresh concrete to form an abrasion resistant monolithic coat, with short-term high mechanical strengths. The finishing, printing or texturing allows traditional flooring to be substituted (cobblestones, natural stone, slate, etc).

Powder product, which, when applied on fresh concrete, it makes a monolithic layer with great resistance to abrasion. Suitable for industrial floors. Paviland Industrial has excellent mechanical strength and great resistance to abrasion. Available in a wide range of colours. Resistant to open air.

Self-levelling, normal setting flooring mortar, pumpable, for levelling and smoothing interior industrial flooring. This product has high mechanical and substrate bonding strength once hardened. Thicknesses from 5 to 15 mm. For interiors: suitable as a finishing coat or base coat to be covered with fine coverings that provide the floor with greater chemical or physical protection, or for a more aesthetic finish. Self-levelling paving ideal for use in the cold season.

Self-levelling floor with normal setting, pumpable, for levelling and smoothing industrial floors. Product with great mechanical resistance and adherence to the substrate once hardened. Suitable for thicknesses from 5 to 25 mm. Indoor applications: suitable as a finishing coat or as a base to be covered with thin coatings that provide the pavement with greater chemical or physical protection or a more aesthetic finish. Outdoors: use only as base layer, never leave exposed (a coating is mandatory).

Powder product, which, when applied on fresh concrete, it makes a monolithic coat with great resistance to abrasion. It has excellent mechanical strengths, and it is easy to clean. Suitable for industrial buildings floors subject to heavy traffic it is also suitable for logistic warehouse floors, shopping centre’s car parks,  or any other similar areas. Without dust formation on the surface.

Powder product which, when applied on fresh concrete, it makes a monolithic layer with great resistance to impact. Great resistance to abrasion. And easy to clean. Ideal for industrial building floors and hypermarkets subject to heavy traffic. Resistant to open air. Without dust formation on the surface.

It is an ecological stabilised soil made of natural aggregates and binders, which give to it their mechanical properties.

Mortar for high abrassion resistance stamped pavements in 5 to 20 mm thickness.
Fine texture and stamping. Suitable to replace ordinary pavements (slabs, bricks, stones, slate and any continuous flooring with industrial finish).
Can be used as a hydratation layer (fresh over fresh).

Adherence promoter, specially developed for the placement of resin pavements on non-porous and/or vitreous surfaces such as ceramics, stoneware, marble, stone, very low porosity concrete, polished cement, etc. Paviland Primer Ceramic makes a quick "wetting” easier on the above-mentioned surfaces, which results in the formation of substrate-polymer type bonds. In general terms, it favours the union between dry silica surfaces and polymerized liquid resin.

A two-component primer based on very low-viscosity epoxy resins, for application on low-porous concrete. It adheres well to PAVILAND EP systems. It is very easy to apply. Among other applications, its use consolidates concrete or mortar floors.

Two-components primer based on epoxy resins, without solvents, of very low viscosity, suitable as  humid substrates primer and vapour barrier.
 

Bi-component primer based on epoxy resins, of high viscosity, for application on very porous concrete. Paviland Primer EP HV is an adhesive flooring product for the PAVILAND EP systems. It also offers easy application. Among its functions is the consolidation of concrete or mortar floors.

Bi-component primer, formulated with epoxy resins in aqueous dispersion, for epoxy coatings. Acts as an adhesion layer for PAVILAND EPOXI-CEM. This product for flooring is adherent on damp supports and young concrete. It also boasts easy application. Among its functions is that of consolidating concrete or cementitious mortar floors.

Bonding primer for Self-levelling Cement Systems by Grupo Puma, for interior and exterior use. Its high penetration performance on the substrate helps it to act as a substrate sealant and bonding primer.

Mortar for bases creation with subsequent placement of other coatings such as parquet, carpet, ceramic, etc. Its fast drying feature allows the application of ceramics within 24 hours, as well as the execution of other types of work with notable time savings compared to other conventional mortars. Suitable for pedestrian traffic and underfloor heating, allowing different application thicknesses: between 20 and 40mm for bonded screed and between 40 and 80 mm for floating screed.

Self-levelling mortar of normal setting for the preparation of interior floorings. Once hardened it must be covered with a discontinuous coating as parquet, carpet, ceramic floor tiles, vinyl flooring etc.

Universal pigment dispersion free from  solvents base on additives related to pigments.

Product based on the dispersal of pure acrylic resin, which can be used directly as a finishing film for concrete paving and printed concrete, protecting them from external agents by sealing the pore.
Applied on printed concrete, this product improves its finishing, giving a uniform and brilliant appearance.
Due to its small particle size, it has good anchorage to the paving and increases its cohesion.
Recommended as curing liquid with an aqueous base, best for printed paving.

Product based on the dispersal of styrene acrylic resin with low water absorption.  Is has good resistance to alkalis and yellowing, as well as great flexibility and durability in the exterior. Recommended as curing liquid with an aqueous base, best for printed paving.

Product based on the dispersal of pure acrylic resin, which can be used directly as a finishing film for concrete paving and printed concrete, protecting them from external agents by sealing the pore.
Applied on printed concrete, this product improves its finishing, giving a uniform and brilliant appearance.
Due to its small particle size, it has good anchorage to the paving and increases its cohesion.
Recommended as curing liquid with an aqueous base, best for printed paving.

Pure acrylic resin dispersion with low water absorption. Suitable for curing concrete on courts, industrial flooring, and continuous flooring in general. It controls water evaporation, regulating the drying time and contributing to a slow curing process which increases the final mechanical strength, achieving more durable surfaces and the maximum development of their hardness.

Liquid product best for paving protection, composed of an acrylic copolymer dissolved in aromatic solvent.  Hardens through evaporation of solvents and acts by penetrating and compacting the particles, increasing paving cohesion both in interior and exterior applications.

Liquid product best for paving protection, formulated on the basis of acrylic resins with excellent hardness and ultraviolet ray resistance, dissolved in aromatic solvents.
Hardens through solvent evaporation and is especially advisable for concrete varnish, cut stone, etc, both in the interior and in the exterior, leaving a protective and decorative film with excellent properties.

Liquid product best for paving protection, composed of an acrylic copolymer dissolved in aromatic solvent.  Hardens through evaporation of solvents and acts by penetrating and compacting the particles, increasing paving cohesion both in interior and exterior applications.

Liquid product best for the concrete curing process in order to promote its maximum performance. Controls hydration water evaporation regulating dry out time and favours slow curing to achieve an increase of final mechanical resistance, achieving more tenacious surfaces and the maximum development of its hardness.
Acts on the surface forming a plastic closing capable of eliminating systematically the formation of cracks and of controlling superficial retraction.

Liquid resin in a solvent medium, suitable for sealing and protecting flooring It is made from polymers based on methacrylate dissolved in aromatic solvents. It hardens through the evaporation of solvents and works by increasing the cohesion of the flooring, creating a decorative and highly resistant layer that enhances the properties of the flooring and increases its durability.

Product based on the dispersion of a pure acrylic methacrylate resin that is recommended as a finish on concrete and printed concrete floors, protecting them from external agents by sealing the pore. This product improves the features of printed concrete, providing it with a uniform and shiny finish. Due to its thin particle size, it has very good anchorage on the pavement and increases its cohesion. Thanks to the components involved in its formulation, it provides the substrate with a decorative and very resistant layer which accentuate the properties in the pavement and increases its durability.

Self-leveling mortar of great fluidity, normal setting and that once hardened creates a screed of great flatness and mechanical resistance. Suitable for interior self-leveling screeds from 10 to 50 mm in adhered screeds and from 50 to 100 mm in floating screeds. Once hardened, it should be covered by discontinuous pavements (ceramic and others). This self-leveling mortar has great leveling capacity, even in large thicknesses. Suitable for interior floor screeds. Radiant heating floors.

Self-levelling Mortar of great fluency, fast dry and once  it gets hard, it create a slab of great flatness and mechanical resistance. Suitable for the accomplishment of self-levelling interiors from 10 to 50 mm in adhered screeds from 50 to 100 mm in floating screeds . Once hardened it must be covered by discontinuous pavements (ceramics, etc) or constant (paintings epoxy, etc). This self-levelling mortar has great levelling capacity, even in large thicknesses. Suitable for indoor floors. Radiant heating floors.

Finely granulated, coloured coating used as an intermediate layer for sport surfaces.

Acrylic resin-based mortar for the application of adhesive layers and regularisation layers to sports and pedestrian surfaces or cycle lanes.

Acrylic resin base mortar for layers levelling of the surface in sports and pedestrian areas or in bicycle lanes.  This pavement product is very easy to apply and it’s suitable for the compensation of irregularities. It is a water base product suitable for indoor and outdoor floors.  Also suitable for car park areas with little traffic. Black colour.

Paint based on acrylic resins in water, micronized fillers and pigments, of a single component, which acts as a decorative, finishing and sealing layer in sports flooring systems and cementitious, concrete and asphalt substrates. This flooring product has an aesthetic finish, easy application, and great durability. Good resistance to ultraviolet rays, as it does not discolor. Water-based product useful for indoor and outdoor areas.

Thin-grained, coloured, two-component, acrylic-epoxy coating that acts as an intermediate coat in sports floors subjected to a significant degree of mechanical wear. This product for floors is very easy to apply and suitable for both interior and exterior areas. Suitable for sport areas floors subjected to intense use. Also suitable for highly durable bike lanes or outdoor car park areas with very low road traffic.

Bi-component, epoxy resin-based primer in aqueous solution with mineral loads, for the preparation of concrete surfaces before the application of acrylic and epoxy-acrylic sports flooring systems. This flooring product has excellent adhesion to cementitious and concrete surfaces. It is easy to apply and can be used both indoors and outdoors. Preparation of concrete surfaces before application of the PAVILAND SPORT systems.

Two-part, epoxy resin-based primer in aqueous solution with mineral fillers, for the preparation of concrete bases before application of acrylic and epoxy-acrylic sports floors systems; for outdoor use.

High performance thixotropic mortar for the preparation of floors that, once hardened, creates a coating with high mechanical resistance, strong adherence to the base of application and high resistance to mechanical abrasion. Its consistency makes it suitable for application on sloping pavements. Suitable for thicknesses from 5 to 30 mm. It is used as leveling mortar for ramps and pavements with slopes in garages and industry.

Paint based on acrylic resins in water, micronized fillers and pigments, of a single component, which acts as a decorative, finishing and sealing layer on cementitious and concrete substrates. Surface hardener for cementitious floors that seals and protects the treated surface. Garages, interior floors or exterior parking areas with very low traffic. It has a good resistance to ultraviolet rays, since it does not discolor.

Two-component epoxy resin-based coating that results in a coating with high mechanical and chemical resistance on concrete or mortar floors. This flooring product has exceptional adhesion to the substrate, high abrasion resistance, and very good chemical resistance to fuels, oils, greases, and acids.  Easy to mix and apply, its applications include industrial floors and warehouses, garages, or laboratories.

Water-based epoxy resin coating, consisting of two components that harden through a chemical reaction and are tolerant to substrates containing some residual moisture. This flooring product exhibits extraordinary adhesion to the substrate, even on wet surfaces. It is also permeable to water vapour and various aggressive agents. Among its characteristics are easy application and being odourless, making it ideal for use in indoor, poorly ventilated garages.

Two-component coating based on aliphatic polyurethanes, quick-drying with high chemical and abrasion resistance. Available in shine or matte finish. It has excellent adhesion to concrete, mortar, epoxy resins, and polyurethane resins. It also exhibits high abrasion resistance and very good chemical resistance.  This flooring product acts as a surface hardener for the substrate, providing good scratch resistance due to its toughness. Suitable for both interior and exterior floors.

Self-levelling covering, normal setting, which once hardened, creates a highly flat surface with high mechanical strength and excellent bonding performance to the substrate. Suitable for thicknesses from 5 to 15 mm.  This self-levelling coating boasts ease of laying and excellent adhesion to cementitious mortars and concrete. It has great levelling capacity as it is a levelling mortar for irregular floors indoors. Renovation of parking pavements.

Self-levelling coating, fast drying, which hardened once creates a coating of high flatness, high mechanical strength and excellent adhesion on the support application. Suitable for thicknesses between 5 and 15 mm. This self-levelling coating boasts ease of laying and excellent adhesion to cementitious mortars and concrete. It has great levelling capacity and is ideal for use in cold weather. Renovation of parking pavements.

PAVILAND® ULTRA RÁPIDO is a dry compensated retraction concrete intended for fixing, supporting and repairing elements that may require high initial strengths and quick opening to transit. Its applications include the fixing of manhole frames, manholes, urban furniture, road repair, filling and anchoring of road signs, repair of industrial floors. It has a great adherence to concrete and quick opening to transit.

Tile adhesive for indoor floor tiling and cladding jobs suitable for bonding ceramic tiles with a medium-high absorption rate.

Adhesive made of mixed bonding agents with an excellent workability, great flexibility, high adherence, reduced slipping and extended open time. Suitable for the application of interior and exterior pavements and claddings. Suitable for the placing for all kind of ceramic pieces. Specially recommended for façades and big surface pavements and floorings with underfloor heating systems. Suitable for plaster or anhydrite substrates. 

Adhesive made of mixed bonding agents with an excellent workability, great flexibility, high adherence, reduced slipping and extended open time. Suitable for the application of interior and exterior pavements and claddings. Suitable for the placing for all kind of ceramic pieces. Specially recommended for façades and big surface pavements and floorings with underfloor heating systems. Suitable for plaster or anhydrite substrates and very demanding applications or that require the flexibility of the product.

Tile adhesive special for its fineness, plasticity and thixotropy for indoor floor tiling and cladding jobs.
Suitable for bonding ceramic tiles with a medium-high adsorption rate.

Cementitious adhesive made of mixed binders, non slip  and extended open time. Suitable for interior and exterior pavements, interior claddings and baseboards. Suitable for the placing  for all kind of ceramic pieces, porcelain clay, natural stone, granite and marble. High grip strength, good workability and aging resistance.

Improved white bicomponent reactive adhesive with excellent flexibility, no vertical sliding, ideal for ceramic tiles, mosaics, natural stones, polycarbonate panels and resin conglomerates. Suitable for interior and exterior areas; for both floors and walls. Excellent workability and optimum water resistance. Suitable for the adhesion of different materials on non traditional supports.

High performance tile adhesive.Special for its thixotropy and long open time for setting indoor and outdoor ceramic flooring, indoor walls, and baseboards.
Specially recommended for tiling swimming-pools with vitreous mosaic tiles and tiling work on plasterboard (carton-gypsum sandwich panels)
Suitable for bonding ceramic tiles with a medium-high absorption rate, marble, mosaic tiles and glass paste.

Cementitious adhesive made of mixed bonding agents, fast hardening and drying properties, with reduced slippage. Suitable for indoor and outdoor cladding on floors and walls. Once hard, does not contain soluble salts that stain the stones or cause efflorescence to exterior facings. Especially suitable for fixing to façades, large areas of flooring, floors with underfloor heating and whenever a fast turn around time is required. It permits bonding all types of ceramic tiles or elements with similar characteristics.

Fast hardening cement adhesive in fluid format, for indoor and outdoor floor tiling jobs, specially recommended for large areas and for floors with underfloor heating systems. Suitable for bonding all types of ceramic tiles.fIt has a fast curing and excellent bonding.

Ready to use adhesive made with resins, and specific additives and agents.
Suitable for fixing any kind of ceramic cladding on vertical interior or exterior substrates. Highly flexible.
Ideal for gluing exhibitions on wood and old tiles. This adhesive is perfect for use on deformable supports.

Ready to use adhesive made with resins, and specific additives and agents. Suitable for fixing any kind of ceramic cladding on vertical interior or exterior substrates. Highly flexible. Ideal for gluing exhibitions on wood and old tiles. This adhesive is perfect for use on deformable supports.

Cementitious adhesive of mixed binders, endowed with flexibility, great adhesion, with reduced slip and extended open time, for laying interior and exterior floor and wall tiles. Specially recommended for façades, big surfaces floors and radiant heating floors. This adhesive is ideal for bonding all types of ceramic pieces.

Cementitious adhesive of mixed binders with excellent workability, endowed with flexibility, great adhesion, with reduced slip and extended open time, for the installation of interior and exterior floors, interior walls, and exterior plinths. Laying of new flooring on top of existing flooring and underfloor heating. Adhesion of all types of ceramic pieces, porcelain stoneware, marble, granite, and natural stone. Suitable for gypsum or anhydrite.

Tile adhesive special for its thixotropy and creamy texture for setting indoor and outdoor ceramic flooring, indoor walls, and baseboards. Suitable for bonding ceramic tiles with a medium-high absorption rate. It has excellent initial adhesion and its creamy texture makes it easy to apply.

Tile adhesive made of mixed bonding agents with reduced sliding and expanded open time, for the placement of all types of ceramic pieces, granite and marble parts on interior and exterior pavement and interior coverings. 

Cementitious adhesive made of mixed binders with high adherence, non slip  and extended open time. Suitable for interior and exterior pavements, interior claddings and baseboards. Suitable for overlaying new pavements on top of a previous tiled floor. Suitable for the placing  for all kind of ceramic pieces, porcelain clay, natural stone, granite and marble. 

Single-component cementitious adhesive with mixed binders, excellent workability, low dust emission, low VOC emissions and high whiteness. It possesses flexibility and high adhesion, with reduced slip and extended open time, suitable for the installation of interior and exterior floors and walls. Specially recommended for façades, big surfaces and radiant heating floors. For gypsum or anhydrite substrates and very tough applications or those requiring the flexibility of the product.

Cementitious adhesive with mixed binders, excellent workability, low dust emission, low VOC emissions and high whiteness. It possesses flexibility and high adhesion, with reduced slip and extended open time, suitable for the installation of interior and exterior floors and walls. Specially recommended for façades, big surfaces floors and radiant heating floors. Suitable for gypsum or anhydrite substrates.

Decorative solution for the gluing of high performance ceramics; with TECNO-ADAPT technology; with low dust emission; including low VOC emission and bacteriostatic properties; antifungal and anti-algae; anti-florescent and hydro-repellent; quick drying and quick setting; high resistance to abrasion and possesses great plasticity; for the sealing of joints up to 20mm. Grouting of all kinds of ceramic parts, heavy traffic, pools, floors with underfloor heating and for the application in areas where a there is a risk of spreading microorganisms.

Single-component, lightweight, high-performance, cementitious adhesive with mixed binders and excellent workability, low dust emission, low VOC emission, endowed with flexibility and high adhesion, with reduced slip and extended open time, for the installation of interior and exterior floors and walls. This adhesive is particularly recommended for the installation of façades, large surface floors and radiant heating floors. Suitable for gypsum or anhydrite substrates.

Cementitious adhesive with mixed binders, excellent workability, low dust emission, low VOC emissions, and great whiteness, high adhesion, with reduced slip and extended open time, suitable for the installation of interior and exterior floors, interior walls and plinths. Installation of new flooring on top of existing one and radiant heating floors. Adhesion of all types of ceramic pieces, porcelain stoneware, marble, granite and natural stone. Suitable for gypsum or anhydrite substrates.

Tile adhesive. For setting indoor and outdoor ceramic flooring, and indoor walls. Suitable for bonding ceramic tiles with a medium-high absorption rate. Ideal for conventional cement-based substrates. In addition, this cement-based adhesive has good workability and high bond strength.

Mixture plasticizer by air occlusion in the mix.

Protects glazed or non glazed ceramic tiles from pigmented stains.
Apply on the surface of the tile avoiding the joints.

Tile adhesive for indoor floor tiling and cladding jobs suitable for bonding ceramic tiles with a medium-high absorption rate.

Thin-layer adhesive mortar for cellular concrete block manufacturing.

Coating mortar based on aerial lime. For plastering on cellular concrete blocks with fine scraping, polish or smooth finish.

Matt paint based on acrylic copolymers, recommended as a decorative and protective coating on all types of vertical surfaces and ceilings such as concrete, brick, plaster, cement, and all types of mineral substrates both indoors and outdoors. Excellent workability and easy application, achieving maximum coverage and whiteness.

Satin plastic paint intended for the protection and decoration of walls made with all kinds of mineral materials (concrete, cement, plaster, etc.) both indoors and outdoors.

Adequate for painting sport fields.

Adequate plastic paint for interior work, on vertical and horizontal cement, plaster, stucco, etc. mortar facing.

Matte plastic paint used as a decorative and protective coating on all types of vertical surfaces and ceilings in constructions, such as concrete, plaster, cement, fibre cement, etc.

Paint of acrylic resins in aqueous dispersion, specially designed for applications in swimming pools. Product of easy application, very good coverage and ideal for permanent contact with water.

HIGH ELASTICITY waterproof elastomeric coating formed by an aqueous dispersion of self-crosslinking acrylic resins by UV rays, pigments and special additives; intended for the protection of all type of materials (concrete, cement, brick, etc...) in which contractions of the facing are expected to cause cracks. also suitable for substrates with cracks that may cause moisture problems. Product available in our Easy-Colours tintometer system.

Permeable smooth cladding based on watery dispersion of acrylic copolymers, pigments and special additives. Highly recommended on concrete, brick and any other cement-based façades where a maximum resistance and quality is required. Product available in our Easy-Colours tintometer system.

Matte coating based on HYDROPLIOLITE resin, indicated for protection and decoration of façades of any kind of material (concrete, cement, bricks, etc.), providing the substrate with an excellent resistance against any environmental condition. With an excellent finish quality. Permeable but porous to water vapour. Highly recommended for substrates with humidity caused by capillarity or breathable. Thanks to its small particle size, it is a self-priming paint.

Decorative and protective coating used as finish coat on all kind of vertical and horizontal walls, both indoors and outdoors, such as concrete, brick, fibre cement boards, etc. It stands out for its whiteness and its great covering power.

Rugged coating best for exterior vertical facing of concrete, brick and construction material based on cement.

Covering and protective paint for vertical walls, highly breathable. Particularly suitable for restoration of façades and other mineral surfaces. Provides a matt finish to painted surfaces.

Synthetic-mineral matte coating for waterproofing, damp-proofing and decoration of all types of façades, interior walls and roofs, always keeping its transpiration. Based on acrylic copolymers and silicone resins. Its water-repellent properties prevent the temporary absorption of moisture and reduce the fouling caused. Silicone resins constitute a mineral-type coating and are therefore permeable to water vapour. The combination of high permeability and high breathability makes silicone resin paint the highest quality product for covering façades, which is the reason for its extraordinary durability and dirt repellent.

Matte coating based on acrylic copolymers with siloxane, indicated for the protection and decoration of façades of any kind of material (concrete, cement, bricks, etc.), providing the substrate with an excellent resistance against any environmental condition. With an excellent finish quality. Product available in our Easy-Colours tintometer system.

Injection resin for anchorage, 2-component and fast curing, resin-based polyester. Styrene-free. Multifunctional, for solid or hollow substrates.

2-component fast curing vinylester injection resin.

Product that provides continuous coverage capable of preventing water seepage and the consequent problems resulting from dampness. It is a coating that completely adheres to the surface, with high flexibility, elasticity and mechanical strength, and which withstands excellently the conditions of its application outside and keeps its properties for a very long time due to its excellent durability.It is especially suitable for preventing water seepage in terraces, flat roofs, tiled roofs, party walls, expansion joints, channels, downspouts, etc,… In general, it can be applied on any external surface that may be passable provided that this is not daily or intensive.

Waterproofing coating with high elasticity and flexibility. It is used as a coating on horizontal surfaces to which it provides continuous coverable capable of preventing water seepage and the consequent problems resulting from dampness.It is a coating that completely adheres to the surface, with high flexibility, elasticity and mechanical strength, excellent durability and very low residual tack of the dry film.It is especially suitable for preventing water seepage in terraces, flat roofs, tiled roofs, party walls, expansion joints, channels, downspouts, etc,…In general, it can be applied on any external surface that may be passable provided that this is not daily or intensive.

High-performance, one-component, neutral and elastic filler for sealing and bonding.

One-component polyurethane-based filler for sealing or bonding.

Powder filler for plastering, to smooth out, fill in cracks, scrapes, holes, etc., ideal for plastering plasticized Gotele surfaces.

Ready-mixed putty for the coating and smoothing of rough surfaces preparing them for the decoration layer.