Products that start with M

Morcem®Dry Mesh consists of double weave threads, essential for the reinforcing. 

Recommended in the application of swimming pool waterproofing systems as DryPool. Gives the system great resistance and stability, and prevents  the appearance of cracks caused by temperature differences or movements.

Especially designed for waterproofing in situ using a sandwich structure. Application between two layers of Pumaflex acrylic rubber.

One-component, fibre-reinforced, fast-hardening and drying, waterproofing membrane, endowed with high flexibility and extended open time, for waterproofing and adhesion of tiles on traditional substrates.

MORCEMDRY PU UV Varnish is a bi-component aliphatic polyurethane elastic render with solvent.
It provides UV resistant, elastic, protective films with high resistance to industrial, polluting atmospheres

Coating mortar based on aerial lime.

For power floated concrete or smooth finish on mortar fillings.

Impervious to rainwater and permeable to water vapou

Epoxy antacid two-component mortar for laying and filling of ceramic tiles and mosaics with joints of width between 1 and 15 mm. Resistant to UV rays exposure and weather and climate action.

Additives and coloured mortar of mixed binders endowed with great fineness and plasticity. Suitable for sealing of joints from 2 to 15 mm in all kind of ceramic cladding. Especially suitable for low porosity pieces (ceramic tiles) 

Coloured, water-repellent, and additive mortar with mixed binders, characterized by high fineness and plasticity. Designed for sealing joints of up to 15 mm in all types of ceramic renders. 
Especially suitable for grouting low-porosity tiles (porcelain stoneware) and pools; with anti- fungal and anti-algae preservative. 

High performance coloured grouting mortar with additives and anti-fungi/anti-algae properties. Fast-setting and fast-hardening, anti-efflorescences and water repellent grout mortar with great plasticity for the sealing of joints from 2 to 20 mm. Highly recommended for areas where the applied product is required to be quickly ready to use and ready for traffic. All type of ceramic pieces grouting in intense traffic areas, swimming-pools, floors with radiant heating systems and for its application in areas prone to the growth of microorganism. 

Acrylic render for waterproofing, protection, and decoration of all types of façades and interior surfaces. Decorative render mortar for the Traditerm External Thermal Insulation system (ETICS).

Synthetic mineral render with highly elastic properties, presented in paste form, suitable for waterproofing, protection, and decoration of all types of façades and interior walls. Formulated with additives capable of preventing and delaying the appearance of moulds and algae. Decorative render mortar for the Traditerm External Thermal Insulation system (ETICS).

Ready to use synthetic mineral render for waterproofing and decorating façades and indoor walls, especially designed for reinforcing skirting boards (baseboards) in the TRADITERM external thermal insulation system. Outdoor and indoor application. 2.  Decorative finish for the external thermol insulation system TRADITERM®. (ETICS).Formulated with additives that prevents and  delay the apparition of algae and molds.

Synthetic mineral render, suitable for the waterproofing and decoration of façades and indoor walls.  Decorative coating in Exterior Thermal Insulation Systems TRADITERM (SATE / ETICS) and Morcemcal range of products.

Synthetic mineral render, suitable for the waterproofing and decoration of façades and indoor walls and ceilings. 

• Internal or external use.
• On walls and ceilings.
• Decorative coating in Exterior Thermal Insulation Systems TRADITERM (SATE / ETICS) .

Resistant synthetic-mineral render, suitable for waterproof, hydrophobize and decoration of all types of façades and interiors with siloxanes, on walls and ceilings with siloxanes, on walls and ceilings. Decorative render for the TRADITERM® External Thermal Insulation System (SATE/ETICS).  Formulated with additives capable of preventing and delaying the growth of mould and algae, it also incorporates hydrophobic properties that prevent temporary moisture absorption and reduce soiling caused by it.

One-coat mortar for decoration and waterproofing of façades. For hand or pump application directly on the brick. Large variety of finishes.

Decorative and waterproofing one-layer mortar for façades. Manual or mechanical application directly on the brick. Impervious to rainwater and permeable to water vapour. Thin scraping finish.

Decorative and waterproofing one-layer mortar for façades. Manual or mechanical application directly on the brick. Great variety of options.

Matte coating based on acrylic copolymers, indicated for the protection and decoration of façades of any kind of material (concrete, cement, bricks, etc.), providing the substrate with an excellent resistance against any environmental condition. With an excellent finish quality.
Preserves concrete structures from degradation caused by atmospheric agents as well as façades, prefabricated elements, beams, pillars, etc.
 

Waterproof coating with high elasticity based on an aqueous dispersion of self-crosslinking acrylic resins by UV rays, suitable for protection and decoration of all kind of material façades (concrete, cement, brick, etc.) giving the support an excellent resistance to the most thus obtaining a top quality finish and in which contractions of the facing are foreseen that may cause cracks.
Preserves concrete structures from degradation caused by atmospheric agents as well as façades, precast elements, beams, pillars, etc.

High resistance monocomponent R4 repair mortar for large thicknesses.

Two-component thixotropic epoxy adhesive; like multipurpose adhesive for most construction materials; suitable for filling joints, cracks and small holes.

Self-compacting high-resistance fluid mortar and balanced retraction.

Renovation mortar for the treatment of damp by capillarity on the lower parts of the wall, facilitating the evaporation of water retained in the wall.

Rapid setting cement prepared. To block water leaks in concrete cracks or fissures on other base-cement surfaces.

R4 high resistance mono-component mortar for thick applications.
Formulated with Sulfo-resistant cement, selected aggregates and additives; reinforced with fibres.

R3 mono-component medium resistant repair mortar.

Class R4 mono - component high performance repair mortar suitable for large thicknesses. Formulated with sulphate resisting cement.

Thixotropic mortar of high strength, with fiber  for concrete  repair and protection , based on nano-silane technology . Classification R4

Photocatalytic dry mortar for façade, indoor jobs, patios, etc finishes. with self-cleaning and pollution-neutralisation capacity. For rendering and final plastering. Permeable to water vapour, allowing the substrate to breathe.

Photocatalytic dry mortar with self-cleaning and pollution-neutralisation capacity. Permeable to water vapour, allowing the substrate to breathe. With the necessary fluidity and time to be applied with a mortar projection pump.

Dry mortar for façade, indoor jobs, patios, etc finishes, rainwater-proof and permeable to water vapour, for plastering and masonry jobs in general.
 

Dry mortar for façade, indoor jobs, patios, etc finishes. Rainwater-proof and permeable to water vapour. For plastering and masonry jobs in general.

Cladding mortar based on aerial lime. Suitable for plastering in thick layers, on ceramic brick, concrete block or any other similar substrates. Impervious to rainwater and highly permeable to water vapour.

Cladding mortar based on aerial lime. Suitable for being plastered in a thin layer on top of rough-coating cement mortars. Impervious to rainwater and highly permeable to water vapour.

Dry mortar for plastering and masonry jobs in general.

Dry mortar with special additives, rainwater-proof and permeable to water vapour with the necessary fluidity and time to be applied with a mortar projection pump.

Dry mortar with special additives with the necessary fluidity and time to be applied with a mortar projection pump.

Bicomponent, solvent-free epoxy resin coating. It can be applied on substrates in contact with aqueous foods or drinking water. Provides waterproof coatings with high resistance to abrasion and acids and alkalis.

Waterproof covering with high elasticity and flexibility. Suitable for avoiding water leakage on terraces, rooftops, roof tiles, expansion joints, downpipes, etc. For repairing areas with existing cracks, or with a tendency to split. It provides continuous coverage capable of preventing water leakage and the subsequent problems deriving from humidity.

Coloured mortar to be used in masonry jobs.

Natural hydraulic-lime mortar for coating.Natural composition, highly breathable.

Natural hydraulic lime smoothing mortar.
Natural composition, highly breathable.

Natural hydraulic-lime mortar(i.pro CALIX NHL 3,5 de FYM-Heidelbergcement Group) for rendering. Natural composition, highly breathable.

Mortar for construction and cladding, for reinforcing reinforced cladding and masonry fill, fibre-reinforced, made of natural hydraulic lime. Natural composition, breathable to water vapour. High mechanical resistance.

Natural hydraulic lime breathable grout for consolidating masonry walls. Natural composition.

Natural hydraulic-lime mortar for brickwork. Natural composition, highly breathable.

Natural hydraulic-lime mortar for smoothing. Natural composition, highly breathable.

Macroporous dehumidifying natural hydraulic lime mortar for remediating damp walls. Natural composition, highly breathable. Classified R, rendering/plastering mortar, complies with regulation EN 998-1. 

Two component flexible waterproofing mortar.

5 x 20 mm rectangular bead made from hydro-expansive polymer for sealing concrete joints, offering excellent durability.

MORCEMDRY PU UV Varnish is an elastic two-component aliphatic polyurethane coating with solvents. It provides resistant and elastic protective films against ultraviolet rays. In addition to that, these films are elastic and also offer great resistance against industrial environments and other pollutants.

Waterproofing mortar. Semi Flexible.

Impermeable mortar of two-components additives for the execution of impermeable coatings.

Single-component polyurethane membrane that produces a continuous, elastic, aromatic membrane completely adhered to the substrate, watertight and 100% waterproof. Its properties make it excellent for its application on all types of surfaces, whether in new construction or rehabilitation.  It has the CE stamp based on a Declaration of Presentations (DoP) made according to the UE305/211 regulation. The MORCEM ELASTIC PM membrane has an ETE 20/0439 certification, with 25 years of useful life for a minimum thickness of 1.5 mm.

MORCEM ELASTIC PM TRANSPARENTE, is a transparent and aliphatic polyurethane resin that, once cured, creates a continuous, elastic membrane, without joints or overlaps, totally watertight and waterproof.
It can be applied by brush or roller.

Coating mortar based on aerial lime. For plastering with a fine scraped, floated or smooth finish, both on cement mortar rendering and directly on the cladding. Impervious to rainwater and permeable to water vapour.

Rendering and decoration lime mortar for both interior and exterior walls.

Lime mortar for wall covering and decorating.
Outdoor and indoor.

High-conductivity grout for pumping, injecting and filling in geothermal plant heat exchangers.

Special adhesive to glue and grout glass blocks. Hight plasticity, resistance and water proofing qualities.

High-strength mortar with self-leveling controlled expansion and no retraction.Medium and thick layers.

High-strength mortar for filling and anchorage of machinery, leveling supports and bridges, etc.Medium and thick layers.

Lightweight, fast-drying insulating semi-dry mortar for screeds, tiles and roofs. Perfect for sloping and flat roofs, screeds of light slabs and insulation in new construction or rehabilitation. This semi-dry mortar can be used as a complement of floor insulation. Also for floating floors and quick-drying light screeds for all types of flooring.

Lightweight and insulating structural concrete for reinforcing floors and reducing thermal bridges. Due to its low density and its flexibility of use, the product is particularly suitable for renovation, it provides high thermal resistance and lightness qualities to the work. This structural concrete is suitable for both, light mixed and collaborative slabs. 

Lightweight insulating mortar of closed texture for  FORGED STEEL AREAS AND  FLAT BUILT-UP ROOFING WITH THE DIRECT APPLICATION OF THE FINISHED PRODUCT OR THE WATERPROOF SHEET.

Barrier against capillary moisture Cream product that, injected into the walls through drills, forms a permanent water-repellent barrier to prevent the rise of damp in building.

Hydraulic mortar, designed for treating joints and coating panels for exterior walls: –AQUAPANEL® from KNAUF®.

Powdered material for the complete joint treatment in plasterboard systems. Hardens through a chemical reaction and air-drying.

Powdered material for the complete joint treatment in plasterboard systems.

Ready-mix material for the complete joint treatment in plasterboard systems.

Dry mortar. Designed for usual and ordinary masonry applications in which a rapid and high performance mortar is required.

Product indicated for the regularisation of vertical surfaces with plastic or paint coatings (except for silicates or polyurethanes), concrete, stuccoed walls or mortar or ceramic plastering.

Mineral mortar for the regularization, levelling and smoothing of surfaces with a thin finish, suitable for absorbent and non-absorbent supports, for  white interior and exterior areas.

Demolding liquid with immediate action.
It forms a non-oily film that allows for immediate demolding of concrete cast.

One-coat mortar.
Specially designed for texturing of interior and exterior coatings.
For hand or pump application directly on the brick.
Rainwater proof and permeable to water vapour.
Wide range of decoration possibilities by combination of colours and textures.

Product for protecting coatings based on a pure acrylic resin dispersion which can be used for finishing stamped mortars, protecting them from external agents by sealing the pores.This product, when applied on stamped mortars, improves their characteristics, giving them a uniform appearance.It increases cohesion due to its fine particle size.

Fast-setting binder. Designed as a setting and hardening regulator for making fast-setting mortars with high strength and dimensional stability.

Slow setting plaster for manual application, suitable for coating interior ceilings and walls, over all types of substrates. Its working time is regulated during the manufacturing process, ensuring a reduced waiting period and greater working time, leading to high productivity and excellent finish quality with high mechanical strength. Thanks to its porous structure, it provides good acoustic insulation. It also controls humidity, for optimal comfort indoors. It is non-combustible and provides good fire resistance.

Projected plaster with a high composition of perlite that has exceptional qualities such as: An increase in retention
of water, increased performance thanks to its lower density, the screeding, cutting and plastering operations are easily carried out due to its slow and progressive setting and hardening thanks to the fact that perlite is included in its composition.
This material has a high coefficient of thermal conductivity and, given its porous structure, provides good acoustic and thermal insulation, protection against low temperatures and against fire.

This quick-setting plaster for manual application offers the ideal solution for supporting frames and rulers, as a bonding agent for bricks and other building material for interior partitions, and for holding electrical boxes and conduits. The application procedure is very simple and gives fast results.

Refractory mortar for setting refractory bricks and to plaster areas subjected to very high temperature.