Paviland® Desmoldeante Líquido
This product is a liquid demoulding agent for use on flooring and printed facings to avoid the concrete or mortar becoming stuck to the moulds.
Additional information
Composition
Unpigmented liquid product based on vegetable and animal fats and oils.
Features and applications
- Permits demoulding immediately after application.
- High anti-sticking performance.
- Prevents the appearance of efflorescence.
Instructions for use
- Once the mortar has been applied to the surface to be treated, apply Paviland Demoulding Agent over the mortar and the moulds or rollers. This action is carried out with the use of a sprayer.
- Apply until the entire base has been covered.
- Next use the moulds or roller selected for the finishing.
- The waiting time varies according to the existing temperature and humidity.
IMPORTANT: Do not use in the case of the mortar having excessive water.
Cautions and recommendations
- Must be applied in temperatures of between 5 and 35ºC.
- Do not apply when there is a risk of frost, rain, strong wind or direct sunlight.
- Do not add water once the product has been sprayed.
- Use gloves during application.
- There are not chemical groups associated with explosives characteristics within the molecule.
- Oxidising properties: this product does not react with combustible substances due to its chemical structure.
Packaging
5 and 25 L. buckets.
Shelf live: It can be stored up to 24 months in its original closed packaging and in the right position; keep it indoors and away from humidity.
Technical data
| Appearance | Very fluid colourless liquid |
| Density | 0.8 (DIN 51757) |
| Viscosity 50ºC | 1.8 – 2.5 m/m²/sec. (DIN 51562) |
| Ignition point | Not Inflammable |
| Approximate performance | 60-80 ml/m² – 15m²/l Approx. |
Note
The instructions for use are given according to our tests and knowledge and do not imply any commitment by GRUPO PUMA nor free the consumer from the examination and verification of the products for their correct use. Claims must be accompanied by the original packaging to allow a proper traceability.
GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
The values obtained by GRUPO PUMAS's products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.
GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
The values obtained by GRUPO PUMAS's products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.