Medium resistance thixotropic mortar, fibrous, fast setting for concrete repairand plastering. R2 Classification.
Product based on special cements, selected aggregates and additives, reinforced with fibres.
Mortar mixing:
Application:
Curing:
R2 REQUIREMENTS | PRODUCT DATA | |
Aspect | Grey powder | |
Granularity | Dmáx 0.5 mm | |
Layer thickness | 4 mm min - 40 mm máx |
|
Compression resistance 28 days (EN 12190) | ≥ 15 N/mm² | ≥ 15 N/mm² |
Chloride content (EN 1015) | ≤ 0,05% | ≤0 ,01% |
Adhesion (EN 1542) | ≥ 0,8 N/mm² | ≥ 0,8 N/mm² |
Carbonation resistance (EN 13295) |
dk ≤ MC type control |
Passing |
Capillary absorption (EN 13057) | ≤ 0,5 kg/m²•h½ |
≤ 0,5 kg/m²•h½ |
Thermal compatibility part 1 (EN 13687-1) | ≥ 0,8 N/mm² | ≥ 0,8 N/mm² |
Quick cooling from High Temperature (50 ciclos) (EN 13687-2) |
≥ 0,8 N/mm² | ≥ 0,8 N/mm² |
Thermal compatibility part 4: Ciclos Térmicos a seco (50 ciclos) (EN 13687-4) |
≥ 0,8 N/mm² | ≥ 0,8 N/mm² |
Compression resistance 28 days (EN 12190) | ≥ 15 N/mm² | |
Compression resistance 28 days (EN 12190) |
≥ 5 N/mm² | |
Beginning and end of setting (EN 13294) | 10 - 15 minutos | |
Kneading water | 20±1 % | |
Performance | 1.7 Kg/m²/mm thickness | |
EN 1504-3 -2006 classification | R2 | |
Type | CC |
|
||
GRUPO PUMA SL Avd. Agrupación Córdoba, Núm.17 14014 (Córdoba) 21 Nº: 215201 |
||
EN-1504-3 MORCEMREST FAST 40 Medium resistance thixotropic mortar, fibrour, fast setting for concrete repair and Type CC |
||
Compression resistance | R2 Tyope | |
Chloride ion content | ≤ 0.05% | |
Adhesion | ≥ 0,8 MPa | |
Carbonation resistance | Passing | |
Thermal compatibilty part 1 | ≥ 0,8 GPa | |
Capirally absortion | ≤ 0.5 Kg/m2h0.5 | |
Thermal compatibilty part 1 | A1 |
The instructions for use are given according to our tests and knowledge and do not imply any commitment by GRUPO PUMA nor free the consumer from the examination and verification of the products for their correct use. Claims must be accompanied by the original packaging to allow a proper traceability.
GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.
In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.
The values obtained by GRUPO PUMAS's products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.