Products that start with M

Epoxy antacid two-component mortar for laying and filling of ceramic tiles and mosaics with joints of width between 1 and 15 mm. Resistant to UV rays exposure and weather and climate action.

Coloured mortar with additives, made of mixed bonding agents.
Great fineness and plasticity.
For grouting 2 to 15 mm joints in all kinds of floor tilings.
Special for grouting low-porosity pieces (porcelain stoneware) and swimming-pools.

Ready to use synthetic-mineral render for waterproofing and decoration of façades and internal walls.
Internal or external use. On walls and ceilings.
Decorative finish for external Thermol Insulation system TRADITERM (ETICS). 

High quality acrylic primer indicated as a coloured wash for MORCEMCRIL. It improves adherence, easyes application homogenises substratc suction, and gives a base coloured covering. Improves covering and adherence of finishing acrylic mortar, while keeping high water vapour permeability. Easy to applicate and excellent adherence to substrate.

Impermeability  and decorative Mineral synthetic cladding for every type of façades and interiors

• In exterior- interior areas
• In walls and ceilings
• Decorative cladding for the exterior thermal insulating system  TRADITERM (SATE/ETICS)

One-coat mortar. Decoration and waterproofing of façades. For hand or pump application directly on the brick.
Rainwater proof and permeable to water vapour.
Large variety of finishes.

One-coat mortar. Decoration and waterproofing of façades. For hand or pump application directly on the brick.
Rainwater proof and permeable to water vapour.
Large variety of finishes.

One-coat mortar. Decoration and waterproofing of façades. For hand or pump application directly on the brick.
Rainwater proof and permeable to water vapour. Fine rough finish.

One-component, cosmetic R3 repair and surface leveling mortar.

High resistance monocomponent R4 repair mortar for large thicknesses.

Rapid setting cement prepared. To block water leaks in concrete cracks or fissures on other base-cement surfaces.

R3 mono-component medium resistant repair mortar.

Dry mortar for façade, indoor jobs, patios, etc finishes. Rainwater-proof and permeable to water vapour. For plastering and masonry jobs in general.

Dry mortar for façade, indoor jobs, patios, etc finishes, rainwater-proof and permeable to water vapour, for plastering and masonry jobs in general.

Dry mortar for plastering and masonry jobs in general.

Mortar with special additives, for watertight cladding jobs.

Morcem Elastic PM Varnish U.V. is a one-component, pigmented, aliphatic varnish which is UVA stable, highly elastic, applied and dried cold and used to protect polyurethane membranes. It dries by reacting with the floor and air humidity. It protects effectively, especially if it is given a dark finish. Used on Morcem Elastic PM on surfaces with light pedestrian traffic which require a glossy finish with stable color which does not yellow.

Lime mortar for wall covering and decorating.
Outdoor and indoor.

Lime mortar for wall covering and decorating.
Outdoor and indoor.

Special adhesive to glue and grout glass blocks. Hight plasticity, resistance and water proofing qualities.

High-strength mortar with self-leveling controlled expansion and no retraction.Medium and thick layers.

Demolding liquid with immediate action.
It forms a non-oily film that allows for immediate demolding of concrete cast.

One-coat mortar.
Specially designed for texturing of interior and exterior coatings.
For hand or pump application directly on the brick.
Rainwater proof and permeable to water vapour.
Wide range of decoration possibilities by combination of colours and textures.

Product for protecting coatings based on a pure acrylic resin dispersion which can be used for finishing stamped mortars, protecting them from external agents by sealing the pores.This product, when applied on stamped mortars, improves their characteristics, giving them a uniform appearance.It increases cohesion due to its fine particle size.

Thermal insulation panel made of self-extinguishing expanded polystyrene, used in the MORCEM® THERM external thermal insulation system. The expanded polystyrene panel is used as insulation within the MORCEM® THERM System both in new and restoration work.

Corner reinforcement profile in perforated PVC, used in the MORCEM® THERM System.

Anchor used to fasten insulation panels in the MORCEM® System.

Refractory mortar for setting refractory bricks and to plaster areas subjected to very high temperature.